Quantcast
Channel: Data converters
Viewing all articles
Browse latest Browse all 28738

Forum Post: RE: ADS1299: Problems with low CMRR

$
0
0
Hi Leo, It really depends on how large the mismatch is. I would just to a simple spot check with a meter to make sure they are not magnitudes of difference. If there are both 1% resistors with the same value it should be fine. Next, I would look in to increasing your filters cutoff frequency. Designing for a cutoff frequency 10x+ the sampling frequency is a general guideline, and with a -3dB point of 3978Hz, your signal is being attenuated (although slightly) well before that. Try increasing the cutoff point to at least ~6kHz and see if that helps.

Viewing all articles
Browse latest Browse all 28738

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>