Hi Bob, Thanks for update. I can see maximum voltage can go up to only 5.5V. I need to use single PCB for two different application. Let me mention for requirement of both load cells. Specs: 1) Excitation Voltage-- > 5~12V 2) Rated Output------- > 2.0 ± 0.15 mV/V 3) Input resistance---- > 385 ± 10 Ohm 4) Output Resistance--- > 385 ± 10 Ohm 5) Capacity--------------- > 150 Kg 6) Electrical Connection---- > 4- Wire -------------------------------------------------------------- For second load cells 1) Excitation Voltage-- > 3~10V 2) Rated Output------- > 1.0 ± 0.15 mV/V 3) Input resistance---- > 1000 ± 10 Ohm 4) Output Resistance--- > 1000 ± 10 Ohm 5) Capacity--------------- > 75 Kg 6) Electrical Connection---- > 3- Wire In above specs you can see, in one load cell voltage requirement is 5~12V while in other it is 3~10V so i should use that part which will be common for both. Please share your thoughts on this.
↧