Hi Jim thanks for reply, Is there a specific DAC EVM you are planning to send the data to? We need tsw1400evm to send the data to it's J4 port or CMOS port, we've a digital signal receiver and would like to use it capture the LVDS signal from ADC3422EVM . we found a module may could do this, but we're not sure. Terasic Inc. P0033 https://www.digikey.tw/product-detail/zh/terasic-inc/P0024/P0024-ND/4215574 or Terasic Inc. P0024 https://www.digikey.tw/product-detail/zh/terasic-inc/P0024/P0024-ND/4215574 for use that module, TSW1400EVM has to direct the LVDS signal to it's J4 (to DAC) port without DAC module? could it do that? or it already did this, and we don't have to do anything? Is it possible to use this P0033/P0024 module to get the LVDS signal from ADC3422evm via TSW1400evm ? it's better to get the signal from ADC3422evm board with some module transfer HSMC to GPIO or something, is there has any module could just transfer LVDS signal from HSMC to GPIO (or other usual port like CMOS ?) for ADC3422EVM ?, if yes, we'll take it into consideration. Are you planning to purchase additional TSW1400EVMs in the future? If so how many and over what timeframe? we for now have no plan to purchase additional TSW1400EVM modules, what we need is to get the LVDS signal from ADC3422evm , but it seems like this board has to connected to TSW1400EVM for its HSMC port(only have two) only? do you have any suggestions for our application? thank you BR Chun-I
↧