Part Number: ADS1256 Hi Chris, Sorry for asking too much. I wonder if you could help me with some of the basic logic analyzer setup for the SPI communication debugging on ADS1256 ? SCLK - pin 13 (SCK) DIN - pin 11 (MOSI) DOUT - pin 12 (MISO) DRDY - pin 9 CS - pin 10 (CS) RESET - pin 8 (or tie HIGH?) For the following pins, which should be set LOW, RISE, HIGH, FALL, or EDGE for the trigger type? Thanks, Khoi Ly
↧