Part Number: DAC7760 Hello, I am using DAC7760 which is interfaced to Infineon xmc4800 microcontroller. I want to use only VOUT with unipolar output (0V to +10V). I have configured the registers as follows. I have made frame length as 24bits wide and sending MSB first. At first I have configured reset register and the data on DIN will be 0x560001. After this I have configured Write configuration register and the data on DIN will be 0x570000. After this I have configured Write control register and the data on DIN will be 0x551001. After this I have configured Write DAC gain calibration register and the data on DIN will be 0x588000. After this I have configured Write DAC data register and the data on DIN will be 0x01FFF0 But for this configuration I am getting 0.7V as output. I have attached my schematic kindly tell me the design is correct or not. Thank You.
↧