Part Number: ADS1296R Hi all, The part in question is fitted into an sleep analyser we produce onsite; the part is reading an analogue signal through the BGA, we’re measuring a differential signal into IN4P and IN4N on the BGA but most of the time does not reach its optimum point/set range (set by the customer). We unfortunately don’t have the means to test the removed BGA on site; therefore I’m asking if anyone knows a method to test removed parts or can you recommend a testing method please. We believe the removed parts are working fine but the range set by the customer is too narrow meaning not all parts are passing- by conducting a test on so called ‘faulty parts’ I want to ensure they are working within your set specifications. Proving the customer tolerances are wrong. Any help would be greatly received. Kind regards, Craig.
↧