Forum Post: RE: Need to provide TI processor solution for LM98519
Hi Costion, Thank you for your response. I understand your team have a holiday by Independence day. I am waiting for your kind feedback. Also, I did not hear from my customer about the limitation of...
View ArticleForum Post: RE: Need to provide TI processor solution for LM98519
Hi Do you have any updates for this topics? Best regards. Kaka
View ArticleForum Post: LM98519: LM98519 connection and output format
Part Number: LM98519 Hi all Would you mind if we ask LM98519 ? We can understand output level is data base. What kind of format does this device output? Or if you have some reference design, could you...
View ArticleForum Post: RE: LM98519: LM98519 connection and output format
Hirotaka, I'm moving your post to the correct forum.
View ArticleForum Post: RE: Need to provide TI processor solution for LM98519
Hi, Don't have yet the final answer. None of the TI Sitara processors will accept the 30 bit wide bus without external FPGA. I find out soon if other TI processor can do the job. Thank you for your...
View ArticleForum Post: RE: LM98519: LM98519 connection and output format
Hello, LM98519 outputs data in parallel format, 10bits wide for each R/G/B block, total 30bits wide( 3x10bits). Output data pins are: DB0-DB9;DR0-DR9;DG0-DG9 Each R/G/B block has 2 inputs, LM98519 can...
View ArticleForum Post: RE: How to design two AFE5809 for realize a doppler measurement...
Hello Chuck, Do you have .ibis model for this part AFE5809ZCF? Thanks, Christian
View ArticleForum Post: No voltage is applied to the sub(-50v) on the TX-SDK-V2 / NOPB board
Hello this is MTOh. Graduate student in Southkorea. No voltage is applied to the sub(-50v) on the TX-SDK-V2 / NOPB board. When I check the board, I can see that sub(-50v) and GND are shorten. How can I...
View ArticleForum Post: RE: No voltage is applied to the sub(-50v) on the TX-SDK-V2 /...
Hello MTOh, Please refer to the below link for response. e2e.ti.com/.../1948290
View ArticleForum Post: RE: No voltage is applied to the sub(-50v) on the TX-SDK-V2 /...
Thanks. I have 1 more question I knew that lm96551 is after version of lm96550 . So can I replace the lm96550 to lm96551 ?? Because lm96550 is discontinued product. thank you.
View ArticleForum Post: RE: TX-SDK-V2/NOPB
Can I reply about your email?? I want to know in detail abc3061@daum.net from Korea.
View ArticleForum Post: RE: TX-SDK-V2/NOPB
Hello Mintack, I believe that this EVM is obsoleted, so support for it is limited. I've contacted the applications engineer again.
View ArticleForum Post: RE: TX-SDK-V2/NOPB
Thanks. Because almost same situation on my board too. some voltages are short with GND now. I knew that lm96551 is after version of lm96550 . So can I replace the lm96550 to lm96551 in...
View ArticleForum Post: RE: TX-SDK-V2/NOPB
: 1.8v, -50v, +50v, 40v, -40v -5v +5v 3.3v SUB -10v +10v
View ArticleForum Post: RE: TX-SDK-V2/NOPB
Hello Mintack, Technically, the TX-SDK-V2 can be used for the LM96551 too as long as one doesn't apply any voltages to VPF and VNF pins. For the LM96551 , the floating supplies are generated internally.
View ArticleForum Post: RE: TX-SDK-V2/NOPB
Mintack, It seems like the device is damaged. The power supply sequencing in the User Guide should be followed strictly to avoid damaging the part.
View ArticleForum Post: LM98725: Random noise patterns in bias frames
Part Number: LM98725 Hi All, We are using the LM98725 in a CCD camera (single channel) and are trying to optimise the signal to noise of the output image. The 98725 is running in 2.4 v input mode at...
View ArticleForum Post: RE: LM98725: Random noise patterns in bias frames
Hello Terry, I've contacted the applications engineer who supports this device.
View Article