Kubilay, The setting of the DAC is based on the GUI configuration. It is still configured as 421 mode based on the picture of the GUI shown before. Basically 421 mode is 2 DACs with 2 different JESD204B interface. We have ability to assign the two DACs to share the same "link0" or have separate "link 0" and "link1" response. We choose separate link response so the handshaking process are independent. In another word, the DAC-A will work regardless of the DAC-B response. I have not tried setting to 211 mode. Please try the mode above as there is really no "211" mode set in our hardware synthesis for the DAC JESD logic. Alarm mask is based on what alarms you want to route to your ALARM pin for interrupt. It is application dependent decided by teh user. Please follow the DAC GUI generated setting in your setup. you can get a capture of the sequence through the low level view
↧