Hi Dmitri I think the attached LMK configuration file should provide what you need. (Please visit the site to view this file) Copy this file into the configuration files folder for the ADC12J4000 Rev E3 GUI, which should be at this path: C:\Program Files (x86)\Texas Instruments\ ADC12J4000EVM GUI\Configuration Files Then rename the existing file " LMK04828 _DB1_Fs_3500Msps.cfg" to " LMK04828 _DB1_Fs_3500Msps.cfg.bak". Then make a copy of the new file and re-name it " LMK04828 _DB1_Fs_3500Msps.cfg". Now when you configure the EVM for onboard clocking at 3760 MHz (using the Program Clocks and ADC button) this new file will be loaded and the LMK04828 will create the needed clock frequencies for the Xilinx FPGA. If you want to use the ADC12J4000 EVM with the TSW capture platforms you will need to rename the files to restore the .bak version for use. I hope this is helpful. Best regards, Jim B
↧