Part Number: DAC8734 *DAC 8734 READ Questions* 1.Voltage on DAC 8734 READ ->The voltage used for DAC control is (DVDD (+ 5v) / IOVDD (+ 3.3v) / AVDD1,2 (VDD + 15v) / AVSS1,2 (-15v)).Of the four voltages, only DVDD + 5v / IOVDD (+ 3.3v) is supplied to the DAC. In case of DAC READ, we ask if AVDD1,2 (VDD + 15v) / AVSS1,2 (-15v) should be applied to DAC. 2.Is the DSDO signal to be 1 when writing? If it is set to '1', should it be controlled to '0' when it is read and read? 3.Resister map for DAC when wirte (x"00" x"0080") DSDO : '1' (x"04" x"4000") Resister map to DAC when read (x"84" x"0000") Write to dac on 24bit 1cycle dac. cs: high -> low -> high clk: low -> 24clk -> low data low -> 24data ->low If read, should CS be applied to dac for 2 cycles? E.g cs: high -> low -> high -> low-> high clk: low -> 24clk -> low -> 24 clk->low data low -> 24data ->low-> 24data -> low thank you
↧