Hi Chandu,
1) The capacitors CB51 to CB58 are there to model the transducer parasitic capacitance. If you are connecting the TX_SDK_V1 board to the transducer, then you don't need those caps anymore and therefore can removed them.
2 & 3) I suggest you probe pin 5 of the device UOTP1 to make sure there is a 3.3V is connected. Then you probe all the supply pins to see if they are getting the proper voltages.
I am sorry that you are having trouble with the TX_SDK_V1 board. We'll help you anyway we can.
Regards,
Charles