Hello, It sounds like the software is not connecting to the hardware. Make sure that you have downloaded ADCPro as well as the plug in for the ADS794xEVM , Under order now , there is a download button. Connect the EVM motherboard, MMB0, to power, when you see the LEDs at the bottom right corner of the motherboard MMB0 board light up, you should be able to connect it to the computer Once downloaded, open ADCPro . then under EVM select the ADS794xEVM plug in. Connect the MMB0 board to the computer using the USB connecter, J1, located next to the power connector. The RESET button on the motherboard only resets the hardware, it will not help with reesting the software. Instead, in the software interface, click EVM, and select the ADS794XEVM to reset. Even if you are already in this window, going through and reselecting starts the communication procress to the board. Regards Cynthia
↧