Forum Post: RE: ADC Speed
Antonello,The ADC will work below the DS spec. Probably down to 2-4 MSPS. But then it will really stop working. No Data coming out of LVDS, or undetermined values. Between 5-10 may be ok, but...
View ArticleForum Post: RE: Connecting inputs of TX810
Hi Damian,Was the SNR increased? I believe this method should have a noise reduction.Did you notice any reflections when the inputs are shorted. What was the input impedance after shorting....
View ArticleForum Post: RE: TSW1400EVM with AFE5805EVM
Hi ChuckI have a HSDC Pro v15.15, I here I couldn't find the rbf file that you mentioned (AFE580x_12b). Can you send it to me or can I use another one?Here came to AFE series: AFE5808_09_12b,...
View ArticleForum Post: RE: TSW1400EVM with AFE5805EVM
(Please visit the site to view this file)(Please visit the site to view this file)(Please visit the site to view this file)Danilo,These ini files will work for the AFE5805. Which version of HSDCPRo do...
View ArticleForum Post: RE: regarding AFE 5809 evm with TSW1400
Chandu,1.Is there a singe tone sine generator that you can use to test this with? I can't see how you would not get a filtered signal on the output of the AFE. 2.What is the resonant frequency of your...
View ArticleForum Post: RE: configuring the syslink shared memory size in Linux
Hey, sudheer singh1.This part is not clear for me as well,and im asking the same question. But i have found some information by far regarding process of sharing information about shared memory across...
View ArticleForum Post: RE: LM98620: Analog input range and datasheet
Hello Hooman,just jumping on this thread as per similar questions I've got from Sander through a different loop.Sander : here below copying in red some of your questions so far. Btw questions on analog...
View ArticleForum Post: VSP8133 CCD AFE : noise issue?
HiI have a issue.Please give me a advice.[Issue]My customer is using VSP8133.Rarely, it becomes a frame brighter than other frames since output pulse is floating.[My reasoning]I suppose that a coarse...
View ArticleForum Post: Part no. for RF to Sma connector
Hi, We bought TxSDKV2 EVM along with AFE5809EVM and TSW1400 EVM. We received 1 set of Samtec RF to SMA cable along with TxSDKV2 Package. The part no. of the above said cable is not mentioned in the...
View ArticleForum Post: RE: Part no. for RF to Sma connector
Hi,I thank both of you for your replies.Regards, Fathima
View ArticleForum Post: AFE5809 Power-up
1) Can you report anything about inrush currents (for all power rails - AVDD, AVDD_5V, AVDD_ADC and DVDD) for AFE5809 ? I dont see any data in AFE5809 datasheet.2) Please specify power-up sequencing...
View ArticleForum Post: RE: LM98620: Analog input range and datasheet
Hello Sander, Sergio, and Koen,My responses in color by <HH 4/22/14>: 1) We also have some problems implementing the power supply for this device. There is a relation defined for the different...
View ArticleForum Post: RE: functioning of LM 96570
Hi,I want to know the range of pulse repetition frequency that can be supported by LM96570. I mean, how much frequency signal supported at Tx_En pin.Thank you.
View ArticleForum Post: RE: regarding AFE 5809 evm with TSW1400
Hi Chandu,First, I just want to prove that the LPF is working. I misunderstood and thought you were using the AFE5809 EVM. Do you still have access the AFE inputs via SMA? If so, can we set the LPF...
View ArticleForum Post: RE: Availability for CCD TC285SPD-B0
Hi, chrisis this item TC285SPD-30 still offer by TI.as i was heard that it's OBSOLETE by your distributors.but from your answer, it's still available in 2013-10-24. pls let me know the...
View ArticleForum Post: AFE5801 VGA
I need an 8 channel device where the VGA gain is totally independent from each channel. Unless I am missing something, the coarse and fine gain appears to apply to all 8 channels. A digital gain...
View ArticleForum Post: RE: Part no. for RF to Sma connector
Hi Fathima,I ask the original person who order the connector. Below is the email from him. I don't know if they change the part number or not. We went to SamTec's website, and the connector should be...
View ArticleForum Post: RE: LM98620: Analog input range and datasheet
Thx Hooman,I'll let you continue the thread with Sander and Koen if they have more questions over the topic.Thx again, nice weekend to allSergio
View ArticleForum Post: specification of LM96570
Hi,I want to know the range of pulse repetition frequency that can be supported by LM96570. I mean, how much frequency signal supported at Tx_En pin.please help me. Thank you.
View ArticleForum Post: RE: Part no. for RF to Sma connector
Yorick, The AFE-TSW connection is direct and requires no cables.The input to the AFE5809 is eight disrete female SMA connectors (requires eight cables).Thanks,Chuck Smyth
View Article