Forum Post: RE: AFE58xx cad symbol (altium)
hi takashi ... I can surely wait for 5 days ... thanks a lot for making the library for me. regards franco
View ArticleForum Post: RE: AFE5801- CPOL/ CPHA + SCLK troubleshooting
I was incorrect about CPOL. CPOL =1 for AFE5801 . Please refer to either pg. 25 (read), pg. 20 (write) of AFE5801 datasheet. CPOL (Clock Polarity)= 1 since SCLK starts high and falling edge is the...
View ArticleForum Post: RE: functioning of LM 96570
Hi Mariusz, Would you please send me (anton_dos@mail.ru) a copy of your application for calculating beamforming delays ? Thank you very much.
View ArticleForum Post: RE: functioning of LM 96570
Hi Anton, I've emailed you the software Maiusz had posted a while back: http://e2e.ti.com/support/other_analog/imaging_afes/f/239/p/243404/920804.aspx#920804 Regards, Hooman
View ArticleForum Post: RE: VSP8133 CCD AFE : noise issue?
Shimizu, As this device is Not Recommended for New Designs, all support is via e-mail. Please contact you local TI FAE for additional support.
View ArticleForum Post: RE: VSP8133 CCD AFE : noise issue?
Hi DHarmon Thank you for your reply. I unsestood. Best regards Shimizu
View ArticleForum Post: Ultrasound AFE eval/dev platforms: LM965xx
I have been looking at LM965XX chip set, but still have questions on best way to evaluate them in a system ( TX-SDK-V2 , LM96511EVK , AFE5803EVM , …..). Is there a recommended platform to start with?...
View ArticleForum Post: RE: AFE58xx cad symbol (altium)
dear takashi, do you have any news on the altium library ? thanks franco
View ArticleForum Post: RE: AFE58xx cad symbol (altium)
Hello Franco, Hi Franco, I apologize for our lateness. Please download a library file from the link below. (Please visit the site to view this file) This IC has many pins, so the schematic is separated...
View ArticleForum Post: RE: Ultrasound AFE eval/dev platforms: LM965xx
Hi Jaden, Each of the solutions you have listed have their own evaluation kit which can aid in their individual evaluation. As far as the LM965xx solutions go, a higher-integrated evaluation perform,...
View ArticleForum Post: RE: LM96511EVK schematics
Hi, Hooman Hashemi Recently, I also use the LM96511EVK schematic you provided on ti forum, but I find there are several pins (v29, v27, u28, u26, a23, b23) on page 14 of the schematic, not the same...
View ArticleForum Post: RE: LM96511EVK schematics
Hello, Sorry I was out of office and just returned. Please use the LM96511 datasheet (not the EVM schematic) for the proper pin name and function. Regards, Hooman
View ArticleForum Post: RE: LM96511EVK schematics
Hello，Hooman Hashemi I have modified those pins according to the pin definitions of the LM96511 datasheet, but still thanks for your answer. On a land across the Pacific Ocean,I wish you a happy life....
View ArticleForum Post: question on AFE5809's coefficient output test mode
Hello, In the datasheet it describes coefficient test mode as below, >>>The Input to the decimating filter can be replaced with a sequence of "one impulse" and "zero" samples, where "one...
View ArticleForum Post: TSW1250EVM with AFE5801EVM
Hi, I am working on AFE5801EVM with TSW1250EVM. But, TSW1250EVM Software only supports to capture one channel at a time. Is there any way to capture multi-channel data simultaneously? Thank you very...
View ArticleForum Post: RE: TSW1250EVM with AFE5801EVM
Vimal, No, this is not possible with the built-in FW for the TSW1250EVM. The newer capture solution is the TSW1400EVM , which can capture all channels simultaneously. http://www.ti.com/tool/ tsw1400evm...
View ArticleForum Post: RE: TSW1250EVM with AFE5801EVM
Hi Vimal, I believe the AFE5801 will work. Please use the ADC label " AFE5808 _09_12b". The output format of these devices is all the same, but I need to test the channel mapping on the EVM. Please let...
View ArticleForum Post: RE: question on AFE5809's coefficient output test mode
Anyone can help looking into the above question? I need clarify it to double check my coefficients. Thanks!
View ArticleForum Post: RE: Beamforming Problems
Jakob, I notices image noise (like rain) over the BW mode on Accuvix V20. In service manual I found there could be a problem with BF board: BD-348-BF (BF BD Accuvix V10) I can send you images. Did you...
View ArticleForum Post: RE: AFE5808 VCA_PDN_CH register not found on table
Hi Dylan, 1. Yes, you make a good point as the datasheet is not clear with these names. I will get back to you with that answer. 2. I will have to measure this as it is not in the datasheet, but the...
View Article