Forum Post: RE: ADS1299: Frequency vs Gain characteristics
Alex-san, Thank you for your reply. Yes, they are... Best Regards, Kuramochi
View ArticleForum Post: RE: ADS5294: Need to use SYNC across multiple devices when NOT...
Hi Bob, How are you? Thank you very much for the detail description about ADS5294 SYNC issue. This is very important to us. We will forward this to our system engineer and reply to you very soon. Thank...
View ArticleForum Post: RE: ADS1299: Frequency vs Gain characteristics
Kuramochi-san, We do not have this information readily available but I should be able to collect without issue. What PGA Gain(s) would the customer like to see? Are the default power supplies,...
View ArticleForum Post: RE: DAC7678EVM: DAC7678EVM - Writing to LDAC register changes...
Thanks for looking into this, Kevin. It's unfortunate that the read-back won't work, thus making it either difficult or impossible to know if the internal reference is continuously powered. Thanks for...
View ArticleForum Post: RE: ADC10D1500RB: ADC10D1500RB/NOPB
because I'm shopping the first time, I have this problem he could download the PRO FORMA invoice for 2 pcs ADC10D1500RB / NOPB ADC10D1500RB / NOPB-The ADC10D1500 is a Low-Power, 10-Bit, Dual 1.5 GSPS...
View ArticleForum Post: ADC12J4000EVM: Sample Mapping and Ordering
Part Number: ADC12J4000EVM I have a question about the sample mapping for the ADC12J4000EVM . I have organized the samples from the JESD204B interface according to Table 12 and Table 13 in the...
View ArticleForum Post: RE: ADC10D1500RB: ADC10D1500RB/NOPB
Hi User I'm not sure what you need. Have you already placed an order at the online TI Store? If you placed an order you should have received a TIstore Order Acceptance email that must be Accepted to...
View ArticleForum Post: RE: ADS8586S: ADS8586SIPM
Hi Muna, I'm checking with team, please allow me a delay to answer your question, thanks for your patience. Best regards Dale
View ArticleForum Post: ADS1278: Maximum SPI clock frequency
Part Number: ADS1278 Hi, We are using ADS1278 with fclk about 1MHz. ADS1278 is connected to a micro-controller using the SPI connection. We run the SPI clock at 4MHz and we can retrieve samples with no...
View ArticleForum Post: RE: ADC10D1500RB: ADC10D1500RB/NOPB
I would like to buy 2 pieces ADC10D1500RB / NOPB pay by bank transfer and you need a PRO FORMA invoice for this
View ArticleForum Post: RE: ADC12DJ3200EVM: ADC12DJ3200EVM and TSW14J57 - JMODE3 problem
Hi Jim, I followed your recommendation. I have attached the log file. Seems all the writes are working well. (Please visit the site to view this file) I have attached pictures of the board...
View ArticleForum Post: RE: DAC38RF93: The question about DAC38RF93 debug
Hi, Since you are using your own board, the serdes mux may have to be configured differently. I will need to review your board schematics to determine the correct settings. Send me a message with your...
View ArticleForum Post: RE: ADS1278: Maximum SPI clock frequency
Hi Sina, Sorry about that, I didn't notice that the thread was archived. In order to guarantee performance of the device the minimum SCLK should be the same period as the modulator clock. Your setup...
View ArticleForum Post: RE: FMC-ADC-ADAPTER: Help to understand the connections in data...
Hello, We are looking into your question and will get back with you shortly. -Chloe
View ArticleForum Post: RE: ADS1256: INA188
Okay Thanks. Consider this setup: I have buffer enabled, give referance voltage of 2.5V, PGA of 16 and connect a current shunt of 15mOhm, and pass current through it. My understanding is: 1. Max...
View ArticleForum Post: RE: ADS8689: How to power?
Hi Marco, The AVDD supply range specified in ADS8689 datasheet is 4.75V to 5.25V, a +5V power supply is recommended for AVDD, so you can use 3.3V for DVDD but you have to provide a +5V supply for AVDD....
View ArticleForum Post: RE: ADS1220: Searching for advice regarding configuration of ADC...
Hi Bob, and thank you very much for your reply. After I wrote here, I continued using a good amount of hours reading through these forums and the datasheet, and were able to write to the config...
View ArticleForum Post: RE: ADS1261: ADS1261: need of sample rate different from default
Hi Marco, Welcome to our e2e forum! What sort of application are you planning to use the ADS1261 in?
View ArticleForum Post: RE: ADS1220: Searching for advice regarding configuration of ADC...
Hi Sadoun, You care correct. REFP0 (pin 9) should connect to your excitation + and REFPN (pin 8) should connect to your excitation -. You would connect your first bridge to AIN0 (pin 11) and AIN1 (pin...
View ArticleForum Post: RE: ADS8689: How to power?
Thanks for the reply Dale, I think I was able to figure that out after reading the datasheet some more. I'm still confused on if the +5V and 3.3V can be pulled from the same source (i.e using the 5V...
View Article