Forum Post: RE: DAC38J84: Which register is configtbd ?
Thank you, Kang, for this prompt and authoritative reply. It appears that the first instance of "configtbd" might have been meant to be generalised, as in "configX" for one of these values for X ......
View ArticleForum Post: RE: Best Suitable Ic for Load cell
Hi Sumit, This is the most common possibility and are used in may types of scales. Usually these 3-wire load cells are used in a combination such as 2 in parallel or 4 to make a bridge which would...
View ArticleForum Post: RE: DAC38J84: What are the semantics of CDR rw_cfgrx0[18:16]?
Dear Kang, Thank you for sharing this additional insight. CDR setting = 000 for our project! Sincerely --todd
View ArticleForum Post: RE: TINA/Spice/ADC12DL3200: TINA/Spice/ADC12DL3200
Hi Jim, I will use a LVDS driver of a FPGA Xilinx Kintex-7. If you don't have a datasheet I will send you. Best Regards, Daniele Sassaroli
View ArticleForum Post: RE: DAC8760: Analog output multiplexing with DAC8760
Hi Alessio, The reference design you mentioned is a good solution for using one DAC8760 to produce multiple channels for voltage and current output. It uses a multiplexer and 8 sample and hold circuits...
View ArticleForum Post: RE: Linux/ADS1299: The value of the CH1 data is different
Keunsoo, This variation is probably caused by noise in the system.
View ArticleForum Post: RE: ADC12DJ3200EVM: Data capture using TSW14J57
Hi Jim, One additional question. What is the format? It saves as two bin files "ADC Temp0.bin" and "ADC Temp1.bin". Is Temp0 Channel 1 and Temp1 Channel 2? Or is it interleaved? UPDATE: Interestingly...
View ArticleForum Post: RE: DAC8760: Analog output multiplexing with DAC8760
Thank you Garrett for the suggestion. It looks really promising except the cost. It's too really expensive. It's gonna to be the right solution for me if I find a safe method to multiplex the DAC8760...
View ArticleForum Post: RE: ADC12DJ3200: What is the Documentation on finding the pinout...
Is there a way to get all 16 lanes available with another adapter? If so can you send me a link so I can buy that adapter for my project?
View ArticleForum Post: RE: ADS122U04IPW - can read data from ads true usb using ftdi...
Hi Matej, 9600 baud is a good starting point. The baud rate is not unlimited and the fastest practical baud rate is 115200. Which baud rate you choose depends on the desired conversion data rate. After...
View ArticleForum Post: RE: ADS131E08: Need C sample driver code
Hi Mahlet, Please accept my friend request and I will send you the code.
View ArticleForum Post: RE: ADS1298: ADS1298 SPI
Hi Sagar, This looks like the internal test signal, and that would explain why there is no difference when the ECG simulator is connected. You can probe the VCAP pins to check your IC:...
View ArticleForum Post: RE: ADS1278EVM-PDK: ads1278-adcproplugin-2.0.0.exe driver...
Hello Rice, Thank you for your post. It sounds like you are using an old link. Please revisit the EVM product page and use the link for "ADS1278EVM-PDK-SW" under Order Now. Best Regards,
View ArticleForum Post: ADS124S08: Configuring for a single-ended measurement
Part Number: ADS124S08 I have a PCB using ADS124S08 for ratiometric measurement of two 4-wire RTD's. These use the pins AIN0-AIN05, REFP0, REFN0, REFP1/AIN6, REFN1/AIN7 and it works great (thanks to...
View ArticleForum Post: RE: Linux/ADS7828: device driver for ADS7838
Priyanka, We are not experts in the x86 architecture and we can't provide the level of support that you're asking for. Please check with the rest of the Linux community to see if anyone else has...
View ArticleForum Post: RE: ADS1293EVM: Emulate WinNT or Win7 on MacOS - Wine OK?
Thank, Alexander. Any hints (best practices, tips, tricks, etc.) on successful emulation on MacOS?
View ArticleForum Post: RE: TSC2007: TSC2007 supurious interrupts / AUX problem
Jeffray, We have dug through the history of these devices and have not been able to find any similar behavior. Were you able to try the different pull-up resistances or AUX input connection?
View ArticleForum Post: RE: DAC8760: Analog output multiplexing with DAC8760
Hi Alessio, Understood regarding your cost concern. This is a single chip solution though so it includes most of the overall cost component wise. I am not sure of how you could filter the current...
View ArticleForum Post: RE: ADS1293EVM: Emulate WinNT or Win7 on MacOS - Wine OK?
Happy to help Ed. I have only worked with Windows computers so I can't offer much here. As far as installing the EVM software, make sure to run the executable as administrator and follow the user's...
View Article